CCNP Routing & Switching Standard Lab Kit v4

CCNP Routing & Switching Standard Lab Kit v4



CCNP Routing & Switching Standard Lab Kit v4

(1 customer review)


In stock (can be backordered)

Console Cable Options: (Choose One)

     None             Free           $29.99        $39.99

None DB9-RJ45 Serial Console Cable - Included $0.00 USB-DB9 Serial Cable - CAB-USB-DB9 +$29.99 USB-RJ45 Console Cable - CAB-CON-USB +$39.99

Rack Options:

Choose from
CCNP Route and Switch books by CCIE Chris Bryant $100
CCNP Route, Switch, Tshoot books by Cisco Press $200
No Books          $100           $200

None BOO-NP-RS-CB Chris Bryant +$100.00 BOO-NP-RS-CP Cisco Press +$200.00
SKU: LAB-NP-RS-v4 Category: Tag:

CCNP Routing & Switching Standard Lab Kit

Presenting our CCNP Routing & Switching Standard Lab Kit for the current CCNP R&S exams. This lab kit has everything you need to learn and pass the CCNP tests.

** You get routers and switches that run IOS 15.7! **

CCNP Routing & Switching Standard Lab Kit Routers Included:

One Cisco 4331 Router Running IOS 16.x

  • 2 Gigabit Ethernet Ports
  • 1 Console port
  • 1 USB port
  • 1 Aux port
  • 2 NIM slots
  • 1 SM-X slot
  • 1 ISC (PVDM) slots
  • 4 GB DRAM & 4 GB Flash Ram (both can be upgraded to 16GB)

One Cisco 1921 Router Running IOS 15.7

  • 2 Gigabit Ethernet ports,
  • 1 console port
  • 1 USB port
  • 1 AUX port
  • 2 EHWIC/WIC/VWIC/VIC slots
  • 4 GB DRAM & 2 GB of flash RAM

One Cisco 1921 Router Running IOS 15.7

  • 2 Gigabit Ethernet ports,
  • 1 console port
  • 1 USB port
  • 1 AUX port
  • 4 EHWIC/WIC/VWIC/VIC slots
  • 1 ISM module slot
  • 512 megabytes DRAM & 128 megabytes of flash RAM

One Cisco 2821 Router Running IOS 15.7

  • 2 Gigabit Ethernet ports,
  • 1 console port
  • 1 USB port
  • 1 AUX port
  • 4 HWIC/WIC/VWIC/VIC slots
  • 1 NM module slot
  • 256 megabytes DRAM & 128 megabytes of flash RAM

In addition you get two Cisco layer 2 switches and two Cisco layer 2/3 switch:

With the CCNP Routing and Switching lab kit you get a pair of Cisco 3750v2 IOS 15.0 Layer 3 Fast Ethernet stackable switches with Open Shortest path First (OSPF) routing support, advanced quality of service (QoS), rate limiting, access control lists (ACLs), and basic static and Routing Information Protocol (RIP) and OSPF routing functions, advanced hardware-based IP unicast and IP multicast routing as well as policy-based routing (PBR), IPv6 routing and IPv6 ACL support and many new or enhanced features over the 3550, 3560 and 3750 switches. Cisco is now testing on being able to configure a switch stack and with this Lab Kit you can create one.

You also receive two Cisco 2960 LanBase switches running IOS 15.0 so you can learn the currently tested IOS. These switches have 24 or 48 ports and two gigabit uplink ports and come with the Enhanced Image IOS loaded which delivers intelligent services such as advanced QoS, rate limiting, security filters, and multicast management to the network edge.

CCNP Routing & Switching Standard Additional Equipment Included:

Lots of accessories are also included,  including two Cisco Aironet 1252 802.11a/b/g/n access point.  This unit supports WPA2 and other security features you will need to learn. Seven HWIC-1DSU-T1 serial cards, one NIM-1MFT-T1 serial card, as well as one Cisco NM-AIR-WLC6-K9. This allows you to gain knowledge on both types of serial interfaces. Plus plenty of cables to wire up all those ports in your labs.


***We provide you with UNLIMITED FREE technical support for each certification lab you purchase. We’re just an e-mail or phone call away ready to help you.


What is included in the CCNP Routing & Switching Standard Lab Kit?

  • 1 Cisco 4331 Router with 4GB-D/4GB-F RAM, IOS
  • 1 Cisco 1921 Router with 4GB-D/2GB-F RAM, IOS
  • 1 Cisco 2901 Router with 512MB-D/128MB-F RAM, IOS
  • 1 Cisco 2821 Router with 256MB-D/128MB-F RAM, IOS
  • 2 Cisco Cisco 3750v2 Layer 2 and Layer 3 Switch/Router.128MB-D/32MB-F RAM, IOS
  • 2 Cisco 2960LanBase 10/100/1000 Switches with 64MB-D/32MB-F RAM, IOS
  • 1 NM-AIR-WLC-6
  • 1 NIM-1MFT-T1
  • 7 HWIC-1DSU-T1 Serial Interface Cards
  • 2 Cisco Aironet 1252 Wireless Access Point w/Antennas
  • 2 Cisco 3750 Stacking Cables
  • 5 5ft Ethernet Cat 5e Cables (yellow)
  • 5 5ft Ethernet Cat 5e Cables (blue)
  • 5 3ft Ethernet Cat 5e Crossover Cables (gray)
  • 4 5ft T1/E1 Crossover Cables (white)
  • 1 Cisco Console Cable (light blue)
  • 8 Power Cables
  • 1 12U Desktop Racks with brackets
  • Access to our secure private download servers with backup IOS’, demo, and other freeware software. OVER 225 Gigabytes!*
  • Unlimited technical support via email and telephone
  • 1 year replacement warranty

Additional configuration information:

To configure the routers and switches, you need a computer with a DB9 serial port to use with the console cable.  However, most of today’s computers do not have this port. Please note that when resetting a password on some Cisco devices, you need to press CTRL-BREAK while the unit is first powered on.  Many of the “cheap” USB to serial adapters do not pass this code, ours does! You can find it by clicking HERE!

Visit our Shipping Policy page for information if you are not located within the continental United States including AA, AE, and AP shipments before you order online.
*** We ship WORLDWIDE!!! ***

Have a Question or want to customize your kit?
Call us for free by clicking the call button below.

Contact Us powered by Voxmeup

♥ We Love to Customize ♥


Additional information

Weight 140 lbs
Dimensions 20 × 20 × 20 in





1941 Router; 100-240VAC auto-switching 1A average.
2851 Router; 100-240VAC auto-switching 2A average.
3750v2 PS-S PoE Switch; 100-240VAC auto-switching 3.5A average.
2960 TT-L Switch; 100-240VAC auto-switching 2.5A average.

Total Amp Usage; 18A average

Share your thoughts!

5 out of 5 stars

1 review

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. Mark Smith

    Mark Smith

    Upon purchasing lab kit from CTS and getting the equipment I am at a point of nirvana. My reasoning, before making a purchase of my Cisco lab equipment I was nervous wreck, Who can I trust? Which company is just trying to get my money while taking advantage of this transaction, which for me is a somewhat gullible experience?

    I read other websites good reviews and horror stories and started to see a pattern. Looking through equipment and realizing trusting yourself first is paramount while at the same time seeing good reviews for CTS was a consistent highlight , not only that their customer service reviews set a precedent. I bypassed the other vendors and gave them a call I was shocked to not only get a human person, also to speak to the owner /operator Michael Durham. I got him on the phone-1st Star ; 2nd Star he was not just interested in just selling to me as one time purchase but gave me his insight and listened to my concerns before we did business and finally; The equipment and cost 3rd-star he helped me stay within my purchasing goals(budget) and explained where extra but not necessary features would put me over in purchase price and not be a significant upgrade to my learning goals.

    Upon covering those basics I was confident in my purchase . Advantage point “advice” is priceless being able to speak to any aspect of the field of certifications sealed the deal advice is priceless when it comes from the right source CTS is a great vendor and I look forward to doing business with Michael in the future.



    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...




Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

You may also like…
    Add to cart

    USB to Serial (DB9) Adapter

  • Sale!
    CCNP R&S Advanced
    Add to cart

    CCNP Routing & Switching Advanced Lab Kit v4

  • Cisco 2511 Kit
    Add to cart

    Cisco 16 port Terminal Server Kit