CCNA Voice Add-On Lab Kit v4

CCNA Voice Add-On Lab Kit v4



CCNA Voice Add-On Lab Kit v4


In stock (can be backordered)

Recommended Buy. Most computers do not have a DB9
serial port for the console cable. Click one of the
following to include with your Lab Kit.

SKU: LAB-NA-VAO-v4 Categories: ,

Product Description

CCNA Voice Add-On Lab Kit

If you already have your CCNA or CCNP Routing & Switching or Security lab kit and want to add voice.  Or if you are purchasing one of our other Lab Kits and want to add voice to it, we created this add-on kit just for you!

Utilizing your Cisco 2800 or 3800 series of routers, this kit adds the necessary Digital Signal Processors and interface cards (MFT-T1’s) to those routers for voice.

Then using your own 3750v2 PoE layer three  switch which provides power to your IP phones.

***You can get a VoIP provider that provides a SIP (Session Initiation Protocol) and make calls over the Internet for a very low cost. We can provide you this service too! Add a note to your order or send us an email and we can set it up.

CCNA Voice Add-On Lab Kit Includes:

To simulate a PRI Voice T1 line, a VWIC-2MFT-T1 Multi-fractional serial card and a pair of VWIC-1MFT-T1 serial cards are included. These cards can send voice, data, or both over a T1 simulated connection. Two T1 crossover cables are provided to connect these cards.

Plenty of phones are included in this CCNA Voice Add-On Lab Kit. Two Cisco 7961 IP phones and two 7941 IP phones.

You will also receive Four Cat5e cables, 1 PVDM3-16 & 2 PVDM2-16 Digital Signal Processor Modules.

CCNA Voice Add-On Lab Kit Training we Include:

Voice and video training is provided by the Cisco Press CCNA Collaboration book set and you can configure the labs in the books on your lab gear. The book has quizzes, test preparation guidelines, and practice questions. Our staff used these books to help earn their CCNA Collaboration certification this year.

We provide you with UNLIMITED FREE technical support for each certification lab you purchase. We’re just an e-mail or phone call away ready to help you.

Additional Equipment you may want to look into…

OPTIONALLY, we can offer you a special discount on CCIE Kevin Wallace’s CCNA Collaboration course with the purchase of this Lab Kit. Check out his training for free at

We include all the (demo license) Cisco software you need to learn CUCM, CUC, CUPS, SDM, CCP, Cisco Communicator and others with your purchase of this Lab Kit. We also provide you with backup copies of the Cisco IOS’ plus additional software including a TFTP server and other utilities. Demo software is provided via access to our download server for all of the voice demo files such as CUCM, CUC, UCCX and much much more.

***HOWEVER, we highly recommend that you purchase one of our SATA drives with all this software loaded on it. This will save days of downloading. You can find that drive at: Voice hard drive

If you want a pair of Cisco 9971 color video IP phones with camera  to help you study the video side of the exam, we offer an add on option at Video Phones add-on.

This is a BYOS Lab Kit, (Bring Your Own Server) to run the Cisco CUCM and other demo software. If you have a server with at least 12GB of RAM and 500GB or harddrive space, you can load VMware ESXi 6 (its FREE at then install your Cisco Demo software and start learning. Another option is to purchase VMware Workstation and load it onto your PC to run the demo software. You may need to add more RAM to your PC depending on how much you currently have and what additional programs you wish to run at the same time.

If you do not have a spare server or do not want to run the software on your PC, you can purchase one of our voice servers with everything pre-loaded on to it from us. Our servers are located HERE if you would like to check them out!

What is included in the CCNA Voice Add-On Lab Kit?

  • 1 PVDM3-16 Digital Signal Processor Modules
  • 2 PVDM2-16 Digital Signal Processor Modules
  • 1 Cisco VWIC-2MFT-T1 PRI Mufti-Flex T1 Serial Interface Card
  • 2 Cisco VWIC-1MFT-T1 PRI Mufti-Flex T1 Serial Interface Cards
  • 2 Cisco 7941 VoIP Phones
  • 1 Cisco 7961 VoIP Phone
  • 4 5ft Ethernet Cat 5e Cables (blue)
  • 2 5ft T1/E1 Crossover Cable (white)
  • 1 Power Cable
  • CCNA Collaboration Official Cert Guide Library (Exams CICD 210-060 and CIVND 210-065) (Hardcover)
  • Access to our secure private download servers with backup IOS’, demo, and other freeware software. OVER 225 Gigabytes!*
  • Unlimited technical support via email and telephone
  • 1 year replacement warranty

Additional configuration information:

To configure the routers and switches, you need a computer with a DB9 serial port to use with the console cable.  However, most of today’s computers do not have this port.  Please note that when resetting a password on some Cisco devices, you need to press CTRL-BREAK while the unit is first powered on.  Many of the “cheap” USB to serial adapters do not pass this code, ours does! You can find it by clicking HERE!

Visit our Shipping Policy page for information if you are not located within the continental United States including AA, AE, and AP shipments before you order online.
*** We ship WORLDWIDE!!! ***

Have a Question or want to customize your kit?
Call us for free by clicking the call button below.

 Contact Us powered by Voxmeup

♥ We Love to Customize ♥

Additional Information

Weight 50 lbs
Dimensions 20 × 20 × 16 in





3750v2 PS-S PoE Switch; 100-240VAC auto-switching 3.5A average.

Share your thoughts!

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

There are no contributions yet.




Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up