386.243.9001 or toll-free 844-CTS-KITS (844-287-5487)

CCNA Routing & Switching Advanced Lab Kit

CCNA Routing & Switching Advanced Lab Kit
(5 customer reviews)
5.00 out of 5 based on 4 customer ratings

$799.99 $699.99

Cisco CCNA Routing & Switching Standard Lab Kit for 200-120 Exam -3
(5 customer reviews)
5.00 out of 5 based on 4 customer ratings

$799.99 $699.99

What is included in the CCNA R&S Advanced Lab Kit:

  • 1 Cisco 2821 Router with 256MB-D/128MB-F RAM, IOS -c2800nm-adventerprisek9-mz.151-4.M1.bin
  • 2 Cisco 2811 Routers with 256MB-D/128MB-F RAM, IOS -c2800nm-adventerprisek9-mz.151-4.M1.bin
  • 1 Cisco 3750v2 Layer 2 and Layer 3 Switch/Router.128MB-D/64MB-F RAM, IOS -c3750-ipservicesk9-mz.150-1.SE.bin
  • 2 Cisco 2960TC-L 10/100 Switches with 64MBD/32MBF, IOS -c2960-lanbasek9-mz..150-2.SE4.bin
  • 4 WIC-1T Serial Interface Cards
  • 4 WIC-1DSU-T1-v2 Serial Interface Cards
  • 10 7ft Ethernet Cat 5e Cables (yellow)
  • 5 3ft Ethernet Cat 5e Crossover Cables (gray)
  • 2 3ft DB60/D60 DTE/DCE Serial Cable (dark teal)
  • 2 5ft T1/E1 Serial Crossover Cable (white)
  • 1 Cisco Console Cable (light blue)
  • 6 Power Cables
  • 1 12U Desktop Rack w/brackets is INCLUDED!
  • The Bryant Advantage’s CCNA Routing & Switching (200-125)  online video course with hands-on labs.  (We provide you with a fully licensed copy of Chris’ course). 
  • The Bryant Advantage’s CCNA Security (210-260) online video course with hands-on labs at no cost to you.
  • The Bryant Advantage’s CCNA ICND1 and ICND2 Practice Exam Packs.
  • Double CCIE Chris Wallace’s CCNA R&S Practice Exam Questions.
  • Access to our secure private download servers with backup IOS’, demo, and other freeware software. OVER 200 Gigabytes!*
  • Unlimited technical support via email and telephone
  • 1 year replacement warranty
  • *Shown with optional cable management option, optional power bar and optional USB-DB9.

In stock (can be backordered)

USB-DB9 Serial Cable

Rack Power Bar

SKU: LAB-NA-RA-v3. Category: . Tag: .

This lab kit IS exams 100-105, 200-105 and 200-125 compatible (version 3.0).

We are including the CCNA Security course for FREE with your purchase of this Lab Kit.

NEW – CCIE Chris Bryant’s ICND1 and ICND2 exam practice packs are now included with every CCNA R&S Lab Kit.

Going for your CCENT and your CCNA Routing & Switching certification and want the very best Lab Kit to learn with? Then our CCNA R&S Advanced Lab Kit is your perfect choice with upgraded routers and switches over our Standard Lab Kit and more accessories too, you can do more and learn more.

With three routers, three switches, six serial cards and lots of cables, this Lab Kit provides you with “real-world and hands-on” experience that simulators and emulators just cannot match. This Lab Kit includes what you need to learn and pass the CCNA R&S (200-125) exam and has all the hardware you need to configure all of the lab scenarios.

The 200-125 test covers topics including Network Fundamentals – 15%, LAN Switching Technologies 21%, Routing Technologies – 23%, WAN Technologies – 10%, Infrastructure Services – 10%, Infrastructure Security – 11%, Infrastructure Management – 10%.  You can download a complete list of exam topics at https://learningcontent.cisco.com/cln_storage/text/cln/marketing/exam-topics/200-125-ccna-v3.pdf

Our CCNA Routing & Switching Advanced Lab Kit has one 2821 router, two 2811 routers running version 15.1 IOS with 2 Fast Ethernet ports, USB, console and AUX ports, 4 HWIC/VWIC/WIC/VIC slots with various configurations, 1 NM/NME enhanced network module slot, and 256 megabytes DRAM with 128 megabytes of flash RAM. These routers provide you with lots of flexibility and expandability as you grow your career in Cisco networking.

Why limit yourself with a lab kit that uses 1841 routers? These are nice routers and they do run the 15.1 IOS, but as you grow your career, they are very limited in their ability to expand.  For one thing, the 1841 router only has two WIC slots and no network module slots. Also, voice is becoming more and more a requirement to know and these routers do not support voice configurations or voice add on equipment. This is why ALL of our Lab Kits use 2800, 3800, and 2900 routers. We do not want you to waste your hard earned money.

A Cisco 3750V2 IOS 15.0 Layer 3 Fast Ethernet stackable switches with Open Shortest path First (OSPF) routing support, advanced quality of service (QoS), rate limiting, access control lists (ACLs), and basic static and Routing Information Protocol (RIP) and OSPF routing functions, advanced hardware-based IP unicast and IP multicast routing as well as policy-based routing (PBR), IPv6 routing and IPv6 ACL support. You also get a pair of Cisco 2960-24-S switches with 24 ports with LanLite 15.0 IOS image delivering intelligent services such as advanced QoS, rate limiting, security filters, and multicast management to the network edge and basic routing functions.

NEW for version 3, one 3750v2 Layer 3 switch and two Cisco 2960-24-S switches all with IOS 15.0 loaded so you can learn the new IOS too.  

Lots of accessories are also included. A set of four WIC-1DSU-T1-v2 serial cards and four WIC-1T serial cards. This allows you to gain knowledge on both types of serial interfaces. With the serial cards you can configure serial connections like T1 and frame-relay. (Frame Relay is no longer on the exam however, its still good to learn it; it will be replaced by MPLS on the exam). With more than double the Ethernet cables over the Basic and Standard Lab Kits and other additional cables, you can create many different typologies to learn from.

The CCNA R&S Advanced Lab Kit includes all the equipment listed below plus the full CCNA Routing & Switching (200-125) online video course presented by CCIE Chris Bryant PLUS Chris’ CCNA Security (210-260) online video course at no charge to you. These courses have lots of “real-world and hands-on” labs for you to learn from. Your copy is fully licensed by The Bryant Advantage and comes with their email support in addition to the free support we provide. *Please note that some additional equipment may need to be purchased to complete every lab as presented by the course instructor.

We provide you with UNLIMITED FREE technical support for each certification lab you purchase. We’re just an e-mail or phone call away ready to help you.

What is included in the Kit:

  • 1 Cisco 2821 Router with 256MB-D/128MB-F RAM, IOS
  • 2 Cisco 2811 Routers with 256MB-D/128MB-F RAM, IOS
  • 1 Cisco 3750v2 Layer 2 and Layer 3 Switch/Router.128MB-D/64MB-F RAM, IOS
  • 2 Cisco 2960TC-L 10/100 Switches with 64MBD/32MBF, IOS
  • 4 WIC-1T Serial Interface Cards
  • 4 WIC-1DSU-T1-v2 Serial Interface Cards
  • 10 7ft Ethernet Cat 5e Cables (yellow)
  • 5 3ft Ethernet Cat 5e Crossover Cables (gray)
  • 2 3ft DB60/D60 DTE/DCE Serial Cable (dark teal)
  • 2 5ft T1/E1 Serial Crossover Cable (white)
  • 1 Cisco Console Cable (light blue)
  • 6 Power Cables
  • 1 12U Desktop Rack w/brackets is INCLUDED!
  • The Bryant Advantage’s CCNA Routing & Switching (200-125)  online video course with hands-on labs.  (We provide you with a fully licensed copy of Chris’ course). 
  • The Bryant Advantage’s CCNA Security (210-260) online video course with hands-on labs at no cost to you.
  • The Bryant Advantage’s CCNA ICND1 and ICND2 Practice Exam Packs.
  • Double CCIE Chris Wallace’s CCNA R&S Practice Exam Questions.
  • Access to our secure private download servers with backup IOS’, demo, and other freeware software. OVER 200 Gigabytes!*
  • Unlimited technical support via email and telephone
  • 1 year replacement warranty
  • *Shown with optional cable management option, optional power bar and optional USB-DB9.

To configure the routers and switches, you need a computer with a DB9 serial port to use with the console cable.  However, most of today’s computers do not have this port.  You can solve this problem by purchasing a USB to serial adapter like the one we offer below.  Please note that when resetting a password on some Cisco devices, you need to press CTRL-BREAK while the unit is first powered on.  Many of the “cheap” USB to serial adapters do not pass this code, ours does!

At the bottom of this page you will find a link to our USB to serial adapter as well as many other great accessories.

Please visit our Shipping Policy page for information if you are not located within the continental United States including AA, AE, and AP shipments before you order online.
*** We ship WORLDWIDE!!! ***

Have a Question or want to customize your kit?
Call us for free by clicking the call button below.

Contact Us powered by Voxmeup

♥ We Love to Customize ♥

What the Online Video Course Covers:

Section: 1 – CCNA 200-125 Video Boot Camp Preview!
CCNA 200-125 Video Boot Camp Preview 3:15
Watching Your Free CCNA Security Course! 1:48

Section: 2 – CCNA 200-125, ICND1, Sec 1: Supermodels! (Network Supermodels, That Is)
Network Fund. 1: Why We Network (And Real-World Success Tips) 7:49
Network Fund. 2: The OSI Model 10:13
Network Fund. 3: The TCP/IP Model (And Real-World Success Tips) 11:07

Section: 3 – CCNA 200-125, ICND1, Sec. 2: Ethernet And Cabling
Physical 1: Ethernet Standards 9:38
Physical 2: Cable Types 7:56
Physical 3: The Fields Of Ethernet 6:02

Section: 4 – CCNA 200-125, ICND1, Sec. 3: Hubs, History, and Why Hubs Are History
Why Hubs Came, Why They Left 8:52
Bridges, Switches, and Logical Segmentation 6:05
Building The MAC Table, Part 1 9:11
Building The MAC Table, Part 2 6:12
Frame Processing, Hex Conversions, and Breaking Down MAC Addresses 13:25
Converting Hex Values To Decimal 7:53

Section: 5 – CCNA 200-125, ICND1, Sec 4: Config Modes, IOS Help, Intro To VLANs
Configuration Modes and IOS Help Intro 10:56
Exec Timeout, Logging Synch, and the Console Port 6:22
VLAN Lab Begins 11:15
VLAN Lab Concludes 7:01
More VLANs / Erasing The Switch / The VLAN.DAT File 13:26
Intro To Trunking 5:20
The Trunking Port Modes 7:06
Filtering Trunk Traffic On A Per-VLAN Basis 7:13

Section: 6 – CCNA 200-125, ICND1, Sec. 5: Memories, Boots, and Passwords
Memory Contents And Boot Processes 8:22
Setup Mode — One Way In, Two Ways Out 8:00
Enable Secret and Enable Password 8:30
Console Port Protection With One Password 6:37
Console Port Protection With Username / PW Database 12:09
Port Security Success Fundamentals 7:36
Port Security Options 5:43
Port Security Static Lab Begins 9:47
Port Security Static Lab Concludes 4:14
Port Security Dynamic Learning Lab 9:07
Port Security Sticky Addresses / Errdisable Recovery Command 10:36

Section: 7 – CCNA 200-125, ICND1: IP Addressing, Binary, and Intro To Routing
IP Addresses, Subnet Masks, and Binary Conversions 8:11
The Public IP Address Classes 8:18
The Private IP Address Classes 5:09
Connected Routes Walkthrough 7:10
Static Route Walkthrough 10:03

Section: 8 – CCNA 200-125, ICND1: Switches, Default Gateways, Telnet, And More!
Introduction To SVIs 8:13
Creating A Non-Default SVI 5:10
Telnet Labs Begin 7:29
Telnet Labs End 9:38
Auto-negotiation 6:56
Slashes and Console Port Options 5:13
The Description and Interface Range Commands 4:57

Section: 9 CCNA 200-125, ICND1: TCP and UDP
“TCP Good, UDP Bad”? 7:23
The Comparison Continues 7:41
Multiplexing and Intro To Port Numbers 6:09

Section: 10 CCNA 200-125, ICND1: DHCP, DNS, And ARP
DNS And ARP 7:39
DHCP Fun(damentals) 8:13

Section: 11 CCNA 200-125, ICND1: Static Routing, Pings, And Hub-And-Spoke Networks
Lab Topology, Pings, And HAS Networking 9:40
Lab Continues; Intro To “Debug IP Packet” 9:38
Lab Continues, Host Static Routing 8:59
Lab Continues, Default Static Routing 6:47
Default Routes Are Beautiful (Sometimes) 4:36

Section: 12 CCNA 200-125, ICND1: Distance Vector In General, RIPv2 In Particular
Intro To Distance Vector Protocols 6:58
Split Horizon and Poison Reverse 9:15
RIP Lab Begins 8:17
RIP Lab Continues 6:59
RIP Lab Concludes 6:20
The Dangers of Autosummarization 7:26
The Cure for Autosummarization 4:02
Passive Interfaces 11:30
Administrative Distances 8:39
Fun With RIP Load Balancing 7:46
More RIP Load Balancing, Intro To Traceroute 7:47
Version Mismatches and Debugging Tips 6:52
Floating Static Route Lab Begins 9:05
Floating Static Route Lab Continues 8:24
Originating A Default Route With RIP 8:21

Section: 13 – CCNA 200-125, ICND 1 and 2 — Subnetting Success!
The Whys, Ins, and Outs of Subnetting 12:59
Decimal-to-Binary Conversions, Single Value Example 5:37
Decimal-to-Binary Conversions, Dotted Decimal Example 5:19
Binary-to-Decimal Conversions 2:35
Number Of Valid Subnets — Classic Approach 10:02
Number Of Valid Subnets — Bulldog Approach 3:07
Number Of Valid Hosts 4:01
Finding The Subnet Of An IP Address 8:42
Determining The Broadcast Address and Valid Address Range 5:29
At Last! Doing The Actual Subnetting Ourselves! 7:06

Section: 14 – CCNA 200-125, ICND 1: Access Lists
Access List Rules 6:23
Wildcard Masks Made Easy 8:07
Standard ACL Lab Begins 10:34
Standard ACL Lab Concludes 7:01
Extended ACL Lab 7:15
“Host”, “Any”, and “The Order Of The Lines” 9:07
Named Standard ACL Lab 8:12
Named Extended ACL Lab 6:23
Telnet and Extended ACLs 8:53
Telnet, Extended ACLs, and Time Ranges 9:01
Sequence Numbers, Telnet, and Extended ACLs 7:17
One More Telnet Test, plus Absolute Time Ranges! 5:50
Where To Put It, and Why 4:53

Section: 15 – CCNA 200-125, ICND 1: The Network Time Protocol
What’s Going On 7:49
Server – Client Lab 8:29
Peering Lab 2:43
Broadcast Mode 3:09

Section: 16 – CCNA 200-125, ICND1: NAT and PAT
The Fundamentals of NAT and PAT 6:50
Static NAT Lab 7:39
Dynamic NAT Lab 7:32
Port Address Translation Lab 6:53

Section: 17 – CCNA 200-125, ICND1: IP Version 6
Curing Address Anxiety With Compression 12:19
The Global Routing Prefix and Subnet ID 10:27
Enabling V6 — Twice! 9:08
Configuring And Verifying IPV6 Addresses 8:37
Link Local Addresses 6:45
Calculating the Interface Identifier 6:48
Using The Interface Identifier as Host Address 3:09
Router Discovery With NDP 4:40
Host Discovery With NDP 8:42
DHCP On Planet IPV6 4:17
Smart Stuff Our DAD Says 3:15
The IPV6 Routing Table 8:48
Pinging IPV6 Addresses 5:53
Static Routes (Recursive and Directly Connected) 7:57
Static Routes (Fully Specified) 4:42
Using The Link-Local Address With Static Routes 5:00
Default and Host Static Routes 4:07
Nuts, Bolts, and Frame Format Comparison 7:57

Section: 18 CCNA 200-125, ICND1 *and* 2: This And That
Timestamps 8:52
The Password Encryption Services 10:00
Console Logging 12:26
Buffer and Syslog Logging 7:15
“Where ARE My Log Messages?” 6:44
Banners 7:10
CDP Fundamentals 7:09
More Fun With CDP 8:44
The Link Layer Discovery Protocol (LLDP 7:34
Cisco Password Recovery Procedures 8:54
A Little More Config Register Work 3:21

Section: 19 – CCNA 200-125, ICND2: VTP (VLAN Trunking Protocol)
Why Do We Need It? 8:18
Lab Continues 8:27
The Mysterious Joins 5:12
The Modes 8:20
The Config Revision Number 10:11
CRN Lab / Fully Initializing The Switch 9:02
The VTP Password 7:05
More On The VTP Password 7:47
Pruning and Real-World V3 Tips 10:18

Section: 20 – CCNA 200-125, ICND2: The Spanning Tree Protocol
The Fundamentals 9:15
Switching Loops and More Fundamentals 9:23
Root Bridge Election Walkthrough 10:58
Root Bridge Election Results (Root Bridge) 6:27
Root Bridge Election Results (Non-Root Bridge) 5:13
STP Timer Changes 8:15
Root Path Cost vs. Port Cost 8:51
Root Port Tiebreakers 6:25|
DP Selection on Non-Root Switches 8:20
Speed Changes and Port Costs 7:20
Per-VLAN Load Balancing 8:13
Choosing Your Roots 7:37
Choosing Your Secondary Roots 8:23
Stone Cold Priority and PortFast 10:50
Root Guard 10:56
BPDU Guard 8:34

Section: 21 – CCNA 200-125 (ICND2): Etherchannels
The Theory 7:53
The Configuration 9:13
The Verification 11:06
The Negotiation 10:10

Section: 22 – CCNA 200-125 (ICND2) : The Rapid Spanning-Tree Protocol
It Begins 8:52
Edge Ports and Lab Work 8:09
More Lab Work! 3:26

Section: 23 – CCNA 200-125 (ICND2): OSPF
Intro To Link State Protocols 8:29
LSAs and Adjacencies 6:18
Network Mask Match — Yes Or No? 9:03
Hello and Dead Timers 6:25
The Adjacency States 9:00
The DR, BDR, and RID 11:03
Why Areas? PLUS: OSPF Not Starting 9:49
Broadcast Network Build 10:09
NBMA Network Build 9:40
RID Fix, Pings, and Shows 10:56
Point-to-Point Network Build 9:52
Broadcast Network Build / Something’s Missing… 9:32
Virtual Link Build 9:03
Cutting Down On Overhead w/ Passive Interfaces 9:25
Verifying Your Passive Interfaces 7:07
New Router In Network / Using The “Default” Option 7:44
Stub Areas 9:20
Total Stub Areas 6:38
ABRs, ASBRs, And Other Router Types 8:21
The Default-Information Originate Command 9:17
Changing The Port Cost Calculation 9:40
More Port Cost Calculation, Plus Changing The Cost At The Interface 6:49
Bandwidth Lab 9:49
Multiple Routers, One Broadcast Segment 7:00
Enabling OSPF On A Per-Interface Basis 10:37
OSPF Finale 11:56

Section: 24 – CCNA 200-125, ICND2: EIGRP
Success Fundamentals 9:21
Successor and Feasible Successor Fundamentals 4:13
NBMA Network Build 7:12
The Spoke-To-Spoke Dilemma 9:55
The Broadcast Network Build 9:10
From Feasible Successor To Successor 8:10
Variance Lab 1 (Just Right) 8:21
Variance Lab 2 (Too Big) 5:59
(No) Wildcard Mask Lab 6:30
DUAL Queries and the EIGRP RID 10:57
Packet Types and Adjacencies 8:09
Timers and Adjacencies 7:48
“Show IP EIGRP Neighbor” and FD / DR Intro 8:30
Applying The Feasibility Condition 8:02
Feasibility, Variance, and Administrative Distances 8:37
The Perils Of Autosummarization 13:57
Passive Interfaces 6:05
The Metric Weights 6:16
“You Say Goodbye, And I Say Hello…” 6:24
Route Summarization With EIGRP 11:54
The Null0 Interface And The AD5 8:48
Bandwidth Review / Intro To Delay 3:43

Section: 25 – CCNA 200-125 (ICND2): OSPF, EIGRP, and RIP For IPv6
Comparison Shopping 7:14
Broadcast Segment Build 11:36
Point-to-Point Link Build 5:33
NBMA Build 8:42
More NBMA Building 5:37
Stub and Total Stub Areas 6:53
Broadcast Segments and V3 Group Joins 7:02
EIGRP For IPV6 Lab 11:24
RIP For IPV6 Lab 7:17
Pop Quiz Answer 2:22

Section: 26 – CCNA 200-125 (ICND2): First-Hop Redundancy Protocols
The Need For FHRP, Plus Intro To HSRP 9:02
HSRP Lab Begins 9:32
HSRP Theory vs. Real World 6:40
Changing The HSRP Active Router 8:31
HSRP Oddities and Error Messages 12:47
HSRP Load Balancing 8:16
HSRP Versions 10:38
Three. Three Routers! (Ah Ah Ah) 4:19
VRRP Theory and Lab 7:32

Section: 27 – CCNA 200-125 (ICND2): PTP WANs, VPNs, and GRE
Setting Up The Lab / Intro To HDLC 10:42
PAP – CHAP Comparison 5:05
CHAP Lab (All Is Well) 6:02
CHAP Lab (Wrong Password) 4:21
CHAP Lab (Wrong / Missing Username) 7:28
PAP Labs 8:40
Intro To Multilink / Multiple Authentication? 8:55
Intro to VPNs and GRE 9:34
GRE Tunnel Build 1 Begins 8:25
GRE Tunnel Build 1 Concludes 5:04
GRE Tunnel Build 2 Begins 11:16
Recursive Routing / GRE Tunnel Build 2 Conclude 7:29
GRE Tunnel Troubleshooting Checklist 9:32
Why Lease Lines? 7:14
The CSU/DSU and DTE/DCE Cables 9:20
PPPoE (PPP Over Ethernet) Lab 12:03
PPPoE Review 5:18
Your Introduction To DMVPN 8:43
Bonus! Configuring A Frame Relay Switch (Part 1) 12:54
Configuring A Frame Relay Switch (Part 2) 7:03

Section: 28 – CCNA 200-125 (ICND2): Fun With L3 Switches (Mostly)
Router-On-A-Stick Theory 11:10
ROAS Verification / Troubleshooting 6:17
Switched Virtual Interfaces 6:59
Routed Ports Lab Begins 8:34
Routed Ports, Routing Protocols, and T-Shooting 9:47
Layer 3 Etherchannel Build Begins 12:13
Layer 3 EC Verification and Troubleshooting 9:40

Section: 29 – CCNA 200-125 (ICND2): Surviving Quality Of Service
FIFO and WFQ 10:46
Tail Drop and TCP Global Synchronization 7:49
LLQ and Round Robins 7:33
IntServ and DiffServ 11:39
Who Do You Trust (Boundary)? 4:22

Section: 30 – CCNA 200-125 (ICND2): Network Monitoring
SNMP Basics 10:38
SNMP Demo 9:05
Intro To SLA 9:27
SLA Lab 10:19
SPAN Begins 10:17
Local SPAN Lab 5:01
Deleting SPAN Sessions / Remote SPAN Theory 5:33
Remote SPAN Lab / Port Restrictions 6:53

Section: 31 – CCNA 200-125 (ICND2): Cloud Computing and Software-Defined Networking
Intro to Cloud Computing 10:34
Intro To APIC And APIC-EM 13:57
APIC-EM Lab Begins (Discovery) 8:54
APIC-EM Lab Continues (Path Trace, ACL Trace) 11:33

Section: 32 – CCNA 200-125 (ICND2): IPv6 ACLs
The Rules 8:11
Standard ACL Build Lab 10:17
Good Pings, Baaaad Pinnnnngs 6:01
T-Shooting (Expected And Otherwise) 8:54
Using Extended IPv6 Pings 5:01
Extended ACLs / Telnet Lab 11:28
Telnet Lab Continues 6:51
Implicit Permits and ACLs 9:44

Section: 33 – Intro To…
Metro Ethernet 8:10
MPLS, Part 1 12:52
MPLS, Part 2 8:31
Switch Stacking 11:09
Cisco’s Switching Model (And Chassis Aggregation) 6:45
Chassis Aggregation 4:10
AAA Fundamentals 7:30
TACACS+ Server Config (New Commands!) 8:55
RADIUS Server Config 9:11
“AAA Authentication Login” Logic 4:53
AAA Lab 10:57
AAA Authorization And Accounting 7:31
Dot1x Port-Based Authentication Theory 6:48
Dot1x Port-Based Authentication Labs 8:32
SSH: The Theory 5:22
Telnet Review / “Transport Input All” 8:42
SSH Versions and Key Creation Lab 10:15
SSH Server Configuration Labs 8:24
SSH Version Mismatches And Wrapup (Almost) 2:58

Section: 34 – CCNA 200-125 (ICND2): The Border Gateway Protocol
Read This Before You Start The BGP Section! 2:57
BGP 1: Introduction 6:16
BGP 2: External BGP Peerings 11:37
BGP 3: iBGP Peering and Loopback Interfaces 8:14
BGP 4: eBGP Peering with Loopback Interfaces 6:31
BGP 5: Advertising Routes with “Network” 11:01
BGP 6: Origin and Next-Hop Attributes 10:05
BGP 7: The Best-Path Selection Process 7:54
BGP 8: Next-Hop Addresses 6:48
BGP 9: The Next-Hop Address Rule 3:31
BGP 10: The Multi-Exit Discriminator (MED) 11:31
BGP 11: Local Pref — All, Or Nothing At All 8:56
BGP 12: Local Preferences — Changing One, But Not All 4:49
BGP 13: The Weight Attribute 10:09
BGP 14: More Weight Work! 7:30
BGP 15: Route Summarization 7:45
BGP 16: Synch Rules and the Full Mesh 8:46
BGP 17: Route Reflectors 11:54
BGP 18: Prefix Lists Begin 11:09
BGP 19: Prefix Lists End 5:32
BGP 20: Some Final Words 8:18

The CCNA Routing and Switching course explained by CCIE Chris Bryant. Your copy is included in your kit at no additional cost to you!

Install or enable JAVA

Weight 115 lbs
Dimensions 20 × 20 × 20 in





2811 Router; 100-240VAC auto-switching 1.5A average.
3750v2 PS-S PoE Switch; 100-240VAC auto-switching 3.5A average.
2960 TC-L Switch; 100-240VAC auto-switching 2.5A average.
Total Amp Usage; 13A average

5 reviews for CCNA Routing & Switching Advanced Lab Kit

  1. Gonzalo Rivera


    Hi Michael,

    I will be grateful if you edit and correct my errors.

    I would like to say the following:
    – I Always felt secure and satisfied just because the Communication between this Company and my self.
    – I got every time the right information on time and because of this I could make mine mind and then order what we needed.
    – I want to thank you for the professionalism of your services.

    Best regards
    Gonzalo Rivera
    IT Utbildare
    Medborgarplatsen 25
    Stockholm Sweden

  2. Matt M
    5 out of 5

    (verified owner):

    I crushed the CCNA test today. Just wanted to thank you for gear, it really made a difference being able to work through all of the labs instead of just watching a video. Onward to the CCNP……


    -Matt M.

  3. William P
    5 out of 5

    (verified owner):

    I purchased an advanced R/Sv2 kit in June of 2016. Although I confirmed each device was functioning, I failed to test all aspects of the included 3550 router. When I finally attempted to access the router using the console port I was unable to communicate with the device. After a single telephone call and email to Michael, I received a replacement 3550 that is functioning properly. I was satisfied with the service and support I received before discovering the issue, but after the quick response, I am ecstatic! I am now a couple of months away from taking my CCNA and feel the kit cost, the service, and support are partly the reasons I feel confident I will pass.

  4. Richard
    5 out of 5

    (verified owner):

    I’m very happy with the Purchase and the sales/support I have received to date.

    Within an hour sending an e-mail outlining my requirements and Training plans to ensure the Kits and add-ons I was planning to order would fill my needs I received a call from Michael to discuss everything. We discussed my needs and confirmed what I should order, shortly after the call I placed the order.

    My order consisted of the following:
    CCNA Routing & Switching Advanced Lab Kit
    CCNA Voice add-on Kit
    FXS and FXO Add in Cards

    Michael was quick to send out a thank you e-mail followed by the Login information for the Course and a very well thought out Start Here document; as well he made sure to keep me up to date on the shipping status of my order.
    I received the packages just over a week after I placed the order, although FedEx was not kind to the packages, everything was well packed/protected and in working order.

    I will note one of the Routers suffered some very minor cosmetic damage during shipping, A small chip to the Plastic Bezel, and there were a few patch cables missing. Michael was quick to respond shipping the missing cables right away and offering to put in a claim with FedEx to get a replacement Bezel. I felt the Claim was unnecessary given the minor nature of the damage and the fact everything was working.

    I should also note they took the time to pre-install all of the Cards and DSP’s that came with the Voice Add-on Kit in the routers prior to shipping.

    Some may argue you can learn everything you need to learn with a Virtual Lab Environment and that may be true of the commands and configuration but you cannot reload an OS image in a Virtual Environment you cannot troubleshoot Physical issues in a virtual environment. You simply cannot do or test anything that requires you to actually be able to touch and physically connect the equipment in a virtual environment.

    I would highly recommend CTS to anyone looking for a Cisco Lab kit, I will certainly be ordering any additional Equipment I need in the future from CTS.

  5. Joseph
    5 out of 5

    (verified owner):

    I have been searching on the internet for a few weeks and tried to contact different vendors selling CCNA Lab Kits, and none of them would answer their phones or respond back by email regarding my questions and concerns about their CCNA Lab Kits.

    I was on my break from my CCENT class, and I called Certification Training Solutions, and Michael Durham answered, and we talk for about 45 minutes. Not one time did Michael tried to up-sell his equipment to me. What he did was listen very carefully and asked me what my goals are and why I want to purchase a lab kit? After, I stated my intentions and the path I wanted to take Michael immediately stopped me and began explaining that the lab kit I wanted to purchase was the wrong kit and it would have cost me a lot of money if I add-on devices in the feature. He called me, and I called him, each call was about 45 to 60 minutes, he explained each machine to me and how they used, and beyond the traditional methods.

    I received my Lab Kit, March 2018, and I received a called from him, and he walked me through each cable connection for each device.
    All the cables, switches, and routers shipped within shrink plastic wrapped. I had one stacked cable missing, and Michael apologized and shipped it immediately.

    I had a pleasant experience purchasing my first lab kit with the support and guidance from Michael Durham at Certification Training Solutions.

    Thank you very much!
    Joseph H.

Add a review

Your email address will not be published. Required fields are marked *