CCNA R&S Course Outline by

Section: 1 – CCNA 200-125 Video Boot Camp Preview!
CCNA 200-125 Video Boot Camp Preview 3:15
Watching Your Free CCNA Security Course! 1:48

Section: 2 – CCNA 200-125, ICND1, Sec 1: Supermodels! (Network Supermodels, That Is)
Network Fund. 1: Why We Network (And Real-World Success Tips) 7:49
Network Fund. 2: The OSI Model 10:13
Network Fund. 3: The TCP/IP Model (And Real-World Success Tips) 11:07

Section: 3 – CCNA 200-125, ICND1, Sec. 2: Ethernet And Cabling
Physical 1: Ethernet Standards 9:38
Physical 2: Cable Types 7:56
Physical 3: The Fields Of Ethernet 6:02

Section: 4 – CCNA 200-125, ICND1, Sec. 3: Hubs, History, and Why Hubs Are History
Why Hubs Came, Why They Left 8:52
Bridges, Switches, and Logical Segmentation 6:05
Building The MAC Table, Part 1 9:11
Building The MAC Table, Part 2 6:12
Frame Processing, Hex Conversions, and Breaking Down MAC Addresses 13:25
Converting Hex Values To Decimal 7:53

Section: 5 – CCNA 200-125, ICND1, Sec 4: Config Modes, IOS Help, Intro To VLANs
Configuration Modes and IOS Help Intro 10:56
Exec Timeout, Logging Synch, and the Console Port 6:22
VLAN Lab Begins 11:15
VLAN Lab Concludes 7:01
More VLANs / Erasing The Switch / The VLAN.DAT File 13:26
Intro To Trunking 5:20
The Trunking Port Modes 7:06
Filtering Trunk Traffic On A Per-VLAN Basis 7:13

Section: 6 – CCNA 200-125, ICND1, Sec. 5: Memories, Boots, and Passwords
Memory Contents And Boot Processes 8:22
Setup Mode — One Way In, Two Ways Out 8:00
Enable Secret and Enable Password 8:30
Console Port Protection With One Password 6:37
Console Port Protection With Username / PW Database 12:09
Port Security Success Fundamentals 7:36
Port Security Options 5:43
Port Security Static Lab Begins 9:47
Port Security Static Lab Concludes 4:14
Port Security Dynamic Learning Lab 9:07
Port Security Sticky Addresses / Errdisable Recovery Command 10:36

Section: 7 – CCNA 200-125, ICND1: IP Addressing, Binary, and Intro To Routing
IP Addresses, Subnet Masks, and Binary Conversions 8:11
The Public IP Address Classes 8:18
The Private IP Address Classes 5:09
Connected Routes Walkthrough 7:10
Static Route Walkthrough 10:03

Section: 8 – CCNA 200-125, ICND1: Switches, Default Gateways, Telnet, And More!
Introduction To SVIs 8:13
Creating A Non-Default SVI 5:10
Telnet Labs Begin 7:29
Telnet Labs End 9:38
Auto-negotiation 6:56
Slashes and Console Port Options 5:13
The Description and Interface Range Commands 4:57

Section: 9 CCNA 200-125, ICND1: TCP and UDP
“TCP Good, UDP Bad”? 7:23
The Comparison Continues 7:41
Multiplexing and Intro To Port Numbers 6:09

Section: 10 CCNA 200-125, ICND1: DHCP, DNS, And ARP
DNS And ARP 7:39
DHCP Fun(damentals) 8:13

Section: 11 CCNA 200-125, ICND1: Static Routing, Pings, And Hub-And-Spoke Networks
Lab Topology, Pings, And HAS Networking 9:40
Lab Continues; Intro To “Debug IP Packet” 9:38
Lab Continues, Host Static Routing 8:59
Lab Continues, Default Static Routing 6:47
Default Routes Are Beautiful (Sometimes) 4:36

Section: 12 CCNA 200-125, ICND1: Distance Vector In General, RIPv2 In Particular
Intro To Distance Vector Protocols 6:58
Split Horizon and Poison Reverse 9:15
RIP Lab Begins 8:17
RIP Lab Continues 6:59
RIP Lab Concludes 6:20
The Dangers of Autosummarization 7:26
The Cure for Autosummarization 4:02
Passive Interfaces 11:30
Administrative Distances 8:39
Fun With RIP Load Balancing 7:46
More RIP Load Balancing, Intro To Traceroute 7:47
Version Mismatches and Debugging Tips 6:52
Floating Static Route Lab Begins 9:05
Floating Static Route Lab Continues 8:24
Originating A Default Route With RIP 8:21

Section: 13 – CCNA 200-125, ICND 1 and 2 — Subnetting Success!
The Whys, Ins, and Outs of Subnetting 12:59
Decimal-to-Binary Conversions, Single Value Example 5:37
Decimal-to-Binary Conversions, Dotted Decimal Example 5:19
Binary-to-Decimal Conversions 2:35
Number Of Valid Subnets — Classic Approach 10:02
Number Of Valid Subnets — Bulldog Approach 3:07
Number Of Valid Hosts 4:01
Finding The Subnet Of An IP Address 8:42
Determining The Broadcast Address and Valid Address Range 5:29
At Last! Doing The Actual Subnetting Ourselves! 7:06

Section: 14 – CCNA 200-125, ICND 1: Access Lists
Access List Rules 6:23
Wildcard Masks Made Easy 8:07
Standard ACL Lab Begins 10:34
Standard ACL Lab Concludes 7:01
Extended ACL Lab 7:15
“Host”, “Any”, and “The Order Of The Lines” 9:07
Named Standard ACL Lab 8:12
Named Extended ACL Lab 6:23
Telnet and Extended ACLs 8:53
Telnet, Extended ACLs, and Time Ranges 9:01
Sequence Numbers, Telnet, and Extended ACLs 7:17
One More Telnet Test, plus Absolute Time Ranges! 5:50
Where To Put It, and Why 4:53

Section: 15 – CCNA 200-125, ICND 1: The Network Time Protocol
What’s Going On 7:49
Server – Client Lab 8:29
Peering Lab 2:43
Broadcast Mode 3:09

Section: 16 – CCNA 200-125, ICND1: NAT and PAT
The Fundamentals of NAT and PAT 6:50
Static NAT Lab 7:39
Dynamic NAT Lab 7:32
Port Address Translation Lab 6:53

Section: 17 – CCNA 200-125, ICND1: IP Version 6
Curing Address Anxiety With Compression 12:19
The Global Routing Prefix and Subnet ID 10:27
Enabling V6 — Twice! 9:08
Configuring And Verifying IPV6 Addresses 8:37
Link Local Addresses 6:45
Calculating the Interface Identifier 6:48
Using The Interface Identifier as Host Address 3:09
Router Discovery With NDP 4:40
Host Discovery With NDP 8:42
DHCP On Planet IPV6 4:17
Smart Stuff Our DAD Says 3:15
The IPV6 Routing Table 8:48
Pinging IPV6 Addresses 5:53
Static Routes (Recursive and Directly Connected) 7:57
Static Routes (Fully Specified) 4:42
Using The Link-Local Address With Static Routes 5:00
Default and Host Static Routes 4:07
Nuts, Bolts, and Frame Format Comparison 7:57

Section: 18 CCNA 200-125, ICND1 *and* 2: This And That
Timestamps 8:52
The Password Encryption Services 10:00
Console Logging 12:26
Buffer and Syslog Logging 7:15
“Where ARE My Log Messages?” 6:44
Banners 7:10
CDP Fundamentals 7:09
More Fun With CDP 8:44
The Link Layer Discovery Protocol (LLDP 7:34
Cisco Password Recovery Procedures 8:54
A Little More Config Register Work 3:21

Section: 19 – CCNA 200-125, ICND2: VTP (VLAN Trunking Protocol)
Why Do We Need It? 8:18
Lab Continues 8:27
The Mysterious Joins 5:12
The Modes 8:20
The Config Revision Number 10:11
CRN Lab / Fully Initializing The Switch 9:02
The VTP Password 7:05
More On The VTP Password 7:47
Pruning and Real-World V3 Tips 10:18

Section: 20 – CCNA 200-125, ICND2: The Spanning Tree Protocol
The Fundamentals 9:15
Switching Loops and More Fundamentals 9:23
Root Bridge Election Walkthrough 10:58
Root Bridge Election Results (Root Bridge) 6:27
Root Bridge Election Results (Non-Root Bridge) 5:13
STP Timer Changes 8:15
Root Path Cost vs. Port Cost 8:51
Root Port Tiebreakers 6:25|
DP Selection on Non-Root Switches 8:20
Speed Changes and Port Costs 7:20
Per-VLAN Load Balancing 8:13
Choosing Your Roots 7:37
Choosing Your Secondary Roots 8:23
Stone Cold Priority and PortFast 10:50
Root Guard 10:56
BPDU Guard 8:34

Section: 21 – CCNA 200-125 (ICND2): Etherchannels
The Theory 7:53
The Configuration 9:13
The Verification 11:06
The Negotiation 10:10

Section: 22 – CCNA 200-125 (ICND2) : The Rapid Spanning-Tree Protocol
It Begins 8:52
Edge Ports and Lab Work 8:09
More Lab Work! 3:26

Section: 23 – CCNA 200-125 (ICND2): OSPF
Intro To Link State Protocols 8:29
LSAs and Adjacencies 6:18
Network Mask Match — Yes Or No? 9:03
Hello and Dead Timers 6:25
The Adjacency States 9:00
The DR, BDR, and RID 11:03
Why Areas? PLUS: OSPF Not Starting 9:49
Broadcast Network Build 10:09
NBMA Network Build 9:40
RID Fix, Pings, and Shows 10:56
Point-to-Point Network Build 9:52
Broadcast Network Build / Something’s Missing… 9:32
Virtual Link Build 9:03
Cutting Down On Overhead w/ Passive Interfaces 9:25
Verifying Your Passive Interfaces 7:07
New Router In Network / Using The “Default” Option 7:44
Stub Areas 9:20
Total Stub Areas 6:38
ABRs, ASBRs, And Other Router Types 8:21
The Default-Information Originate Command 9:17
Changing The Port Cost Calculation 9:40
More Port Cost Calculation, Plus Changing The Cost At The Interface 6:49
Bandwidth Lab 9:49
Multiple Routers, One Broadcast Segment 7:00
Enabling OSPF On A Per-Interface Basis 10:37
OSPF Finale 11:56

Section: 24 – CCNA 200-125, ICND2: EIGRP
Success Fundamentals 9:21
Successor and Feasible Successor Fundamentals 4:13
NBMA Network Build 7:12
The Spoke-To-Spoke Dilemma 9:55
The Broadcast Network Build 9:10
From Feasible Successor To Successor 8:10
Variance Lab 1 (Just Right) 8:21
Variance Lab 2 (Too Big) 5:59
(No) Wildcard Mask Lab 6:30
DUAL Queries and the EIGRP RID 10:57
Packet Types and Adjacencies 8:09
Timers and Adjacencies 7:48
“Show IP EIGRP Neighbor” and FD / DR Intro 8:30
Applying The Feasibility Condition 8:02
Feasibility, Variance, and Administrative Distances 8:37
The Perils Of Autosummarization 13:57
Passive Interfaces 6:05
The Metric Weights 6:16
“You Say Goodbye, And I Say Hello…” 6:24
Route Summarization With EIGRP 11:54
The Null0 Interface And The AD5 8:48
Bandwidth Review / Intro To Delay 3:43

Section: 25 – CCNA 200-125 (ICND2): OSPF, EIGRP, and RIP For IPv6
Comparison Shopping 7:14
Broadcast Segment Build 11:36
Point-to-Point Link Build 5:33
NBMA Build 8:42
More NBMA Building 5:37
Stub and Total Stub Areas 6:53
Broadcast Segments and V3 Group Joins 7:02
EIGRP For IPV6 Lab 11:24
RIP For IPV6 Lab 7:17
Pop Quiz Answer 2:22

Section: 26 – CCNA 200-125 (ICND2): First-Hop Redundancy Protocols
The Need For FHRP, Plus Intro To HSRP 9:02
HSRP Lab Begins 9:32
HSRP Theory vs. Real World 6:40
Changing The HSRP Active Router 8:31
HSRP Oddities and Error Messages 12:47
HSRP Load Balancing 8:16
HSRP Versions 10:38
Three. Three Routers! (Ah Ah Ah) 4:19
VRRP Theory and Lab 7:32

Section: 27 – CCNA 200-125 (ICND2): PTP WANs, VPNs, and GRE
Setting Up The Lab / Intro To HDLC 10:42
PAP – CHAP Comparison 5:05
CHAP Lab (All Is Well) 6:02
CHAP Lab (Wrong Password) 4:21
CHAP Lab (Wrong / Missing Username) 7:28
PAP Labs 8:40
Intro To Multilink / Multiple Authentication? 8:55
Intro to VPNs and GRE 9:34
GRE Tunnel Build 1 Begins 8:25
GRE Tunnel Build 1 Concludes 5:04
GRE Tunnel Build 2 Begins 11:16
Recursive Routing / GRE Tunnel Build 2 Conclude 7:29
GRE Tunnel Troubleshooting Checklist 9:32
Why Lease Lines? 7:14
The CSU/DSU and DTE/DCE Cables 9:20
PPPoE (PPP Over Ethernet) Lab 12:03
PPPoE Review 5:18
Your Introduction To DMVPN 8:43
Bonus! Configuring A Frame Relay Switch (Part 1) 12:54
Configuring A Frame Relay Switch (Part 2) 7:03

Section: 28 – CCNA 200-125 (ICND2): Fun With L3 Switches (Mostly)
Router-On-A-Stick Theory 11:10
ROAS Verification / Troubleshooting 6:17
Switched Virtual Interfaces 6:59
Routed Ports Lab Begins 8:34
Routed Ports, Routing Protocols, and T-Shooting 9:47
Layer 3 Etherchannel Build Begins 12:13
Layer 3 EC Verification and Troubleshooting 9:40

Section: 29 – CCNA 200-125 (ICND2): Surviving Quality Of Service
FIFO and WFQ 10:46
Tail Drop and TCP Global Synchronization 7:49
LLQ and Round Robins 7:33
IntServ and DiffServ 11:39
Who Do You Trust (Boundary)? 4:22

Section: 30 – CCNA 200-125 (ICND2): Network Monitoring
SNMP Basics 10:38
SNMP Demo 9:05
Intro To SLA 9:27
SLA Lab 10:19
SPAN Begins 10:17
Local SPAN Lab 5:01
Deleting SPAN Sessions / Remote SPAN Theory 5:33
Remote SPAN Lab / Port Restrictions 6:53

Section: 31 – CCNA 200-125 (ICND2): Cloud Computing and Software-Defined Networking
Intro to Cloud Computing 10:34
Intro To APIC And APIC-EM 13:57
APIC-EM Lab Begins (Discovery) 8:54
APIC-EM Lab Continues (Path Trace, ACL Trace) 11:33

Section: 32 – CCNA 200-125 (ICND2): IPv6 ACLs
The Rules 8:11
Standard ACL Build Lab 10:17
Good Pings, Baaaad Pinnnnngs 6:01
T-Shooting (Expected And Otherwise) 8:54
Using Extended IPv6 Pings 5:01
Extended ACLs / Telnet Lab 11:28
Telnet Lab Continues 6:51
Implicit Permits and ACLs 9:44

Section: 33 – Intro To…
Metro Ethernet 8:10
MPLS, Part 1 12:52
MPLS, Part 2 8:31
MPLS VPN 6:24
Switch Stacking 11:09
Cisco’s Switching Model (And Chassis Aggregation) 6:45
Chassis Aggregation 4:10
AAA Fundamentals 7:30
TACACS+ Server Config (New Commands!) 8:55
RADIUS Server Config 9:11
“AAA Authentication Login” Logic 4:53
AAA Lab 10:57
AAA Authorization And Accounting 7:31
Dot1x Port-Based Authentication Theory 6:48
Dot1x Port-Based Authentication Labs 8:32
SSH: The Theory 5:22
Telnet Review / “Transport Input All” 8:42
SSH Versions and Key Creation Lab 10:15
SSH Server Configuration Labs 8:24
SSH Version Mismatches And Wrapup (Almost) 2:58

Section: 34 – CCNA 200-125 (ICND2): The Border Gateway Protocol
Read This Before You Start The BGP Section! 2:57
BGP 1: Introduction 6:16
BGP 2: External BGP Peerings 11:37
BGP 3: iBGP Peering and Loopback Interfaces 8:14
BGP 4: eBGP Peering with Loopback Interfaces 6:31
BGP 5: Advertising Routes with “Network” 11:01
BGP 6: Origin and Next-Hop Attributes 10:05
BGP 7: The Best-Path Selection Process 7:54
BGP 8: Next-Hop Addresses 6:48
BGP 9: The Next-Hop Address Rule 3:31
BGP 10: The Multi-Exit Discriminator (MED) 11:31
BGP 11: Local Pref — All, Or Nothing At All 8:56
BGP 12: Local Preferences — Changing One, But Not All 4:49
BGP 13: The Weight Attribute 10:09
BGP 14: More Weight Work! 7:30
BGP 15: Route Summarization 7:45
BGP 16: Synch Rules and the Full Mesh 8:46
BGP 17: Route Reflectors 11:54
BGP 18: Prefix Lists Begin 11:09
BGP 19: Prefix Lists End 5:32
BGP 20: Some Final Words 8:18

{"cart_token":"","hash":"","cart_data":""}