386.243.9001 or toll-free 844-CTS-KITS (844-287-5487)

Labs

Cisco Lab Configurations with step-by-step instructions for:
Routing & Switching / Security / Voice


Basic Router, Switch, and IOS & Firmware Loading

Lab 1 – Clear Switch Configuration
Lab 2 – Clear Router Configuration
Lab 3 – Loading the IOS with Xmodem
Lab 4 – Loading the IOS from a TFTP Server
Lab 5 – Loading/updating 7940/7960 firmware
Lab 6 – Loading CUE onto an AMI-CUE

Cisco Feature Configuration

Lab 1 – Configuring DHCP
Lab 2 – Configuring SDM

Security Configuration

Lab 1 / Static IP to Static IP IPSec Site-to-Site VPN
Lab 2 / Static IP to Dynamic IP IPSec Site-to-Site VPN
Lab 3 / GRE over IPSec Site-to-Site VPNs
Lab 4 / DMVPNs

Call Manager Express Voice Configurations

Lab 1 – Basic Network Setup
Lab 2 – Telephony Settings
Lab 3 – Upgrading an IP Phone’s Firmware
Lab 4 – Configuring a SIP FREE Trunk
Lab 5 – Dial Peer Inbound
Lab 6 – Dial Peer Outbound
Lab 7 – Dial Peer POTS/FXO/FXS
Lab 8 – ePhone & ePhone-dn Configurations
Lab 9 – Digit Manipulation & Translation
Lab 10 – Troubleshooting Cisco VoIP with IOS Commands
Lab 11 – Setting CUE Defaults and Activating CUE (Cisco Unity Express)
Lab 12 – CUE Auto Attendant Setup
Lab 13 – TBA
Lab 14 – Music on Hold
Lab 15 – Custom Message on Phones / Logo on 7970 IP Phone
Lab 16 – 7914 Expansion Module
Lab 17 – QoS DiffServ & IntServ
Lab 18 – QoS Low Latency Queuing Class Based Weighted Fair Queuing
Lab 19 – QoS Configuring Auto QoS
Lab 20 – QoS CoS Traffic Marking & Classification

Cisco Unified Call Manager
Lab 1 – Installing CUCM from A VMware Image
Lab 2 – Installing CUCM from A Fresh Installation
Lab 3 – Installing CUC from A Fresh Installation
Lab 4 – Installing CUPS from A Fresh Installation

VMware Labs

Lab 1 – VMWare Hypervisor ESXi Download and Free License
Lab 2 – Installing VMware Hypervisor ESXi onto a server.
Lab 3 – Installing VMware client onto your workstation.